EdilKamin Iris Plus Spécifications télécharger pdf (Page 23)

WEEKLY TIME PROGRAMMER BUILT INTO PANEL

The concept of the weekly time programmer built into the central panel

It is possible to set 3 ignition programmes:

Pr 01 with settable on and off times;

Pr 02 with settable on and off times;

Pr 03 with settable on and off times.

It is possible to enable one or more of the three settings on each day of the week (day1 = Monday, day2 =

Tuesday…day7 = Sunday).

When on standby, the display alternates between showing the ignition mode (P1, P2, P3 or a temperature) and the

clock. Refer to page 10 for each of the buttons to press.

Setting the clock

Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appears.

Press the "-" key until SEt appears. Press the MENU key until the clock appears. It may be changed with the "-" key,

which decreases the time by one minute each time it is pressed, and with the "+" key, which increases it by 15 minutes

each time it is pressed. Once the time is set, confirm with the MENU key. The day number appears (day1=Monday,

day2=Tuesday… day7=Sunday), which can be changed with the "-" and "+" keys. Confirm with the MENU key.

Prog appears. Press the 0/1 key to quit clock setting.

Enabling programmes

Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appe-

ars. Press the "+" key until Pr OF appears. Press the MENU key until OFF appears. Press the "+ " or "-" key until ON

appears. Confirm with the MENU key. Prog appears. Press the O/1 key to return to standby. When the stove is in Pr

mode, it responds to programmed on and off times.

Setting a programme (e.g. Pr01)

Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appe-

ars. Press the "+" key twice until Pr1 appears. Press the MENU key until On P1 appears together with the "on time". It

may be changed with the "+" and "-" keys in ten-minute intervals. Press the MENU key to confirm. OfP1 appears

together with the off time. This may be changed with the "+" and "-" keys in ten-minute intervals. Press MENU to

confirm. "Of d1" appears (which means program 1 is not enabled on day 1, Monday). This may be changed into Ond1

(which means program 1 is enabled on day 1, Monday) using the "+" and "-" keys.

Press MENU to move on to the second day, and so on until day 7.

Press the MENU key again and Prog appears. To quit programming press the 0/1 key.

On and off times may be set for Pr 2 and Pr 3 in a similar way, and it can be decided which days they are enabled on.

ENGLISH

sk tecnica irisplus multilingua_def.qxp 08/10/2008 14.23 Pagina 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Pas de commentaire

EdilKamin Iris Plus Spécifications Page 23