EdilKamin Iris Plus Spécifications télécharger pdf (Page 22)

SCREW FEEDER LOADING

If the pellet hopper empties completely, press the + and - keys together to fill the screw feeder.

This must be done before igniting the stove again if it has shut down due to running out of pellets.

It is normal for a few pellets to be left in the hopper, which the screw feeder is not able to pick up.

IGNITION

Automatic ignition

Hold the 0/1 key down for two seconds with the stove on standby to start the ignition procedure. Ac appears on the display

for a few minutes (the ignition procedure does not actually take a preset time: it is automatically shortened if the electro-

nics detect that certain tests are passed). The flame appears after about five minutes. It is normal for a little smoke to be

seen in the combustion chamber before the flame appears. "Ar" appears on the display until the flame stabilizes.

Manual ignition

At temperatures of less than 3°C (too low for the heating element to glow) or if the heating element is temporarily out

of order, a firelighter may be used for ignition. Put a piece of well lit firelighter in the combustion chamber, close the

door and press 0/1.

Operating modes (when the stove is working, press the MENU key to switch between modes)

Manual: adjust the working power (from P1 to P3 with the right wheel) and the ventilation (with the left wheel).

Automatic: set the temperature which the room is to reach; the stove automatically adjusts the working power to

reach it (P3) or maintain it (P1).

If you set a lower temperature than current room temperature, the stove operates at P1 and consumes the corre-

sponding quantity of pellets.

Note on flame variability

Any variations in the state of the flame depend on the type of pellet used, the normal variability associated with solid

fuels and the periodic automatic combustion chamber cleaning (which does NOT replace the essential cold vacuum-

cleaning by the user before ignition).

Switching off

Hold the 0/1 key down for two seconds while the stove is operating. The shutdown procedure starts and the word "Off"

appears on the display (for a total of 10 minutes).

During shutdown:

• Pellet loading ceases.

• Ventilation turns up to maximum.

• The smoke expulsion motor turns up to maximum.

Never unplug the stove while it is shutting down.

ENGLISH

sk tecnica irisplus multilingua_def.qxp 08/10/2008 14.23 Pagina 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Pas de commentaire

EdilKamin Iris Plus Spécifications Page 22